(v. t.) To strain or move out of a straight line; to crook by straining; to make crooked; to curve; to make ready for use by drawing into a curve; as, to bend a bow; to bend the knee.
(v. t.) To turn toward some certain point; to direct; to incline.
(v. t.) To apply closely or with interest; to direct.
(v. t.) To cause to yield; to render submissive; to subdue.
(v. t.) To fasten, as one rope to another, or as a sail to its yard or stay; or as a cable to the ring of an anchor.
(v. i.) To be moved or strained out of a straight line; to crook or be curving; to bow.
(v. i.) To jut over; to overhang.
(v. i.) To be inclined; to be directed.
(v. i.) To bow in prayer, or in token of submission.
(n.) A turn or deflection from a straight line or from the proper direction or normal position; a curve; a crook; as, a slight bend of the body; a bend in a road.
(n.) Turn; purpose; inclination; ends.
(n.) A knot by which one rope is fastened to another or to an anchor, spar, or post.
(n.) The best quality of sole leather; a butt. See Butt.
(n.) Hard, indurated clay; bind.
(n.) same as caisson disease. Usually referred to as the bends.
(n.) A band.
(n.) One of the honorable ordinaries, containing a third or a fifth part of the field. It crosses the field diagonally from the dexter chief to the sinister base.
Example Sentences:
(1) Fifty-two pairs of canine femora were tested to failure in four-point bending.
(2) Think of Nelson Mandela – there is a determination, an unwillingness to bend in the face of challenges, that earns you respect and makes people look to you for guidance.
(3) This behavior consists of a very rapid bend of the body and tail that is thought to arise from the monosynaptic excitation of large primary motoneurons by the Mauthner cell.
(4) Intrinsic bending of the 527-bp fragment (bend center approximately at bp 240) was represented as a composite of at least two components located near bp 170 and near bp 260.
(5) We found that the Gallie system generally allowed significantly more rotation in flexion, extension, axial rotation, and lateral bending than the other three fixation techniques.
(6) After a hiatus, Smith is back with a flourish for her genre-bending new novel How to be Both , and David Mitchell has been longlisted for a third time, for The Bone Clocks .
(7) The developed apparatus included ultrasonic generators operating at a frequency of 0.5-3 MHz, piezoceramic radiators of various design providing the heating of an object with convergent, divergent and plane ultrasonic waves, thermoprobes in the form of single or multiple thermocouples with the bends from 5 points at a 5 mm distance from one another, temperature meters and various auxiliaries.
(8) Optical diffraction measurements on electron micrographs of the bend demonstrate that the axostyle tubules slide over one another and that the tubules on the inside of a bend usually contract, sometimes by as much as 25%.
(9) Temperature decline through the region of 10 degrees C caused a number of spermatozoa in buffer to undergo a sudden asymmetric bending of the flagellum in the region of the midpiece.
(10) This large increase in power output can be accommodated without an increase in metabolic rate only if internal viscous resistances to flagellar bending are relatively low.
(11) I was asked, as still the home secretary, would you bend on ID cards, and we'd put all our bits in, and we thought we could get a deal here.
(12) We measured the stiffness of comparable configurations (1 or 2 bars) under axial compression, four-point-bending in two planes, and torsion.
(13) The criteria of failure of pedicular instrumentation or "death" of an implant were defined as 1) screw bending, 2) screw breakage, 3) infection, 4) loosening of implants, 5) any rod or plate hardware problems, or 6) removal of hardware due to a neurologic complication.
(14) Static and fatigue testing of representative samples by the simultaneous application of compressive and bending loads to the maximum values specified by international standards exposed no failures by the time a million cycles had been reached.
(15) My Paul Nuttalls routine has floated back up the U-bend | Stewart Lee Read more Nuttall told Marr that “nothing should be a sacred cow in British politics.
(16) Using fluorescence energy transfer, the extent of DNA bending was estimated by measuring the end-to-end distance of the DNA fragment which was labeled with a donor-acceptor pair on two opposite ends.
(17) Future ice loss and bending of the crust due to rising sea levels have the potential ultimately to raise levels of both earthquake and volcanic activity.
(18) In addition, the ability to bend DNA is retained by a small proteolytic fragment of the protein, suggesting that the DNA-binding domain of the protein is resistant to proteases and is sufficient to bend DNA.
(19) As in our previous studies, the modulus of elasticity in bending was significantly less than the value obtained in tension for only the smaller cross-sectional wires.
(20) Assuming no future environmental or lifestyle changes, the upward trend in age-adjusted mortality rates, which averaged 2 to 3% per annum since 1950, is projected to discontinue and bend downward by the second decade of the 21st century.
Swage
Definition:
(v. t. & i.) See Assuage.
(n.) A tool, variously shaped or grooved on the end or face, used by blacksmiths and other workers in metals, for shaping their work, whether sheet metal or forging, by holding the swage upon the work, or the work upon the swage, and striking with a sledge.
(v. t.) To shape by means of a swage; to fashion, as a piece of iron, by forcing it into a groove or mold having the required shape.
Example Sentences:
(1) The best processing schedule is casting small ingots while avoiding oxidation, followed by swaging, drawing, and homogenization.
(2) The swaged metal matrix provides a method for rapidly making a metal substructure for ceramic crowns.
(3) Those differences between swaged and cast specimens were seemed to depend on the casting porosities.
(4) 4 wt.% Si were chosen for this study because they have Curie temperatures in the desired range of 45-60 degrees C. The thermoseeds were prepared by using either a special casting technique or casting and swaging followed by homogenization.
(5) 1) The tensile strength and elongation of swaged specimen showed highest value at 30 wt% Au but in case of casted specimen, tensile strength was highest as 20 wt% and elongation was minimum at 30 wt% Au.
(6) A new double-armed microsuture using 70-mu micro-edge taper-point (M.E.T., Sharpoint, Reading, PA) needles swaged onto 10-0 (22 mu) monofilament nylon has been developed by us primarily to allow precision intraluminal suture placement.
(7) The purpose of this study is to evaluate the biomechanical performance of laser-drilled and channel needle swages.
(8) In this experiment, an uniform-moment bending load method was employed to simulate the occlusal situation, and the distribution of strain in epoxy resin, stainless swaged and Co-Cr alloy cast dentures were measured and analyzed.
(9) Malleting or swaging a beveled margin is a more sucessful technique of adapting cast gold to the cavosurface angles.
(10) This study determined the vertical and horizontal marginal fidelity of swaged metal substrate crowns made with four methods.
(11) The anastomoses were performed with an operating microscope with monofilament nylon 10-0 (Ethilon) and polyglactin 910 (Vicryl) 10-0 (0.2 m) swaged to a BV-6 taper-point needle.
(12) These benefits of laser-drilled swages indicate that they should replace all channel needles.
(13) Parham bands and swage-lock titanium cables were found to exhibit the greatest fixation potential and highest ultimate strengths.
(14) The laser-drilled swages have a more uniform circumference that encounters lower drag forces than the channel needle swages.
(15) Microsurgical ureteroureterostomy was performed in 100 rats with Nylon and Vicryl 10-0 and 11-0 swaged on a BV-6 and BV-8 needle.
(16) Swaged PVC foil used for packing pharmaceuticals, also known here as strip packing or press-through packing for pills and dragees was employed as plates for the cultures.