What's the difference between calking and caulking?
Calking
Definition:
(p. pr. & vb. n.) of Calk
(n.) The act or process of making seems tight, as in ships, or of furnishing with calks, as a shoe, or copying, as a drawing.
Example Sentences:
(1) Three case reports are given where the horses were shoed with full bar shoes with clips and high calks, and were given two months rest in a box.
Caulking
Definition:
Example Sentences:
(1) There was no difference in post-operative sensitivity between the teeth restored with Barricaid or Caulk Temporary Crown and Bridge Resin.
(2) Cathodic, linear anodic, and anodic polarization studies conducted on three commercial dental amalgams, Caulk Fine Cut Alloy, Spheralloy, and Dispersalloy, showed that all amalgams were in a passive state at the corrosion potential in synthetic saliva solution.
(3) This provides an ideal caulking substance to use as a sealing material during endodontic procedures where leakage of oral fluids is anticipated or has occurred after dental dam placement.
(4) Caulk varnish and Polyvar had values lying between the two materials.
(5) This study investigated the effects of thermal stress and specimen storage time on the tensile bond strength of three prosthodontic adhesives: Comspan (LD Caulk), Panavia Opaque (Kuraray), and Super-Bond (Sun Medical).
(6) By using light cured periodontal protection like Barricaid from Caulk: the patients have a greater adaptation with their appliance.
(7) Plasticine and Weatherstrip Caulking Cord were found to meet all criteria best.
(8) The breakdown of passivity in Caulk Alloy and Spheralloy amalgams is attributed to the presence of the gamma2 phase (Sn7-8Hg) whereas the passive behavior of Dispersalloy amalgam is attributed to the absence of the phase.
(9) • Seal the tops and bottoms of skirting boards using silicon mastic or decorative caulking.
(10) Leakage of low-melting-point metals from the underside of polystyrene molds can be prevented by applying a silicone caulking material to the bottom of the mold and pressing the mold on a metal plate before pouring.
(11) Additional documentation regarding the etching of ceramic materials, including Dicor (Caulk Company Ltd., Milford, DE) was produced.
(12) Newly developed amalgams such as Tytin, Sybraloy, and Dispersalloy had low static creep, high compressive strength, and similar values for both diametral tensile strength and dimensional change in comparison with conventional amalgams such as Kerr Spheraloy, Caulk Spherical, Shofu Spherical, and Caulk 20th Century Micro Cut.
(13) The smoothest surfaces were obtained using Centrix System rubber points alone, Centrix System rubber points plus Caulk's Prisma Gloss fine and super-fine pastes, and Caulk's Enhance disks plus Caulk's Prisma Gloss fine and super-fine pastes.
(14) The purpose of this paper is to demonstrate two cases of esthetic conservative anterior crown reconstruction and a posterior composite restorative technique using a newly introduced polishable hybrid material (Prisma APH, L. D. Caulk Co., Milford, DE).
(15) It is suggested that in existing structures with infiltration of radon from the soil remedial action be based on the principle of first trying to caulk obvious and accessible openings and, if this is not possible, installing a sub-floor depressurising system.
(16) Seven light-cured proprietary composite restorative materials, P-50 (3M), P-10 (3M), P-30 (3M), FulFil (Caulk), Herculite (Kerr), Silux Plus (3M) and Silux (3M) were characterized in terms of water uptake at 37 degrees C. For several of the systems, elastic modulus and glass transition temperature were evaluated with a dynamic mechanical analyser (Autovibron DDV-II-C).
(17) Airborne compounds from two groups of plasticizers used in air conditioner filters and caulks as well as flexible polyvinyl chloride and related plastics have been identified as major sources of low level laboratory contamination that can cause serious interferences in pollutant analyses especially at the low levels requiring GCEC for quantitation.
(18) The combination of cavity design with enamel conditioning and the use of a low viscosity sealant prior to the insertion of the composite (Caulk Nuva System) resulted in restorations showing no microleakage and a perfect marginal adaptation.
(19) In Columbia, which is in the middle of the state, business owners spent Saturday caulking and duct-taping windows and readying sandbags.
(20) Both new and conventional dental alloys and their amalgams, namely Tytin, Sybraloy, Dispersalloy, Kerr Spheraloy, Caulk Spherical, Shofu Spherical, and Caulk 20th Century Microcut were used to complete the investigation.