What's the difference between chill and mould?

Chill


Definition:

  • (n.) A moderate but disagreeable degree of cold; a disagreeable sensation of coolness, accompanied with shivering.
  • (n.) A sensation of cold with convulsive shaking of the body, pinched face, pale skin, and blue lips, caused by undue cooling of the body or by nervous excitement, or forming the precursor of some constitutional disturbance, as of a fever.
  • (n.) A check to enthusiasm or warmth of feeling; discouragement; as, a chill comes over an assembly.
  • (n.) An iron mold or portion of a mold, serving to cool rapidly, and so to harden, the surface of molten iron brought in contact with it.
  • (n.) The hardened part of a casting, as the tread of a car wheel.
  • (a.) Moderately cold; tending to cause shivering; chilly; raw.
  • (a.) Affected by cold.
  • (a.) Characterized by coolness of manner, feeling, etc.; lacking enthusiasm or warmth; formal; distant; as, a chill reception.
  • (a.) Discouraging; depressing; dispiriting.
  • (v. t.) To strike with a chill; to make chilly; to cause to shiver; to affect with cold.
  • (v. t.) To check enthusiasm or warmth of feeling of; to depress; to discourage.
  • (v. t.) To produce, by sudden cooling, a change of crystallization at or near the surface of, so as to increase the hardness; said of cast iron.
  • (v. i.) To become surface-hardened by sudden cooling while solidifying; as, some kinds of cast iron chill to a greater depth than others.

Example Sentences:

  • (1) The water is embossed with small waves and it has a chill glassiness which throws light back up at the sky.
  • (2) Scanned rump fat measurements were consistently approximately 20% higher than on the chilled, hanging carcass 24 h after slaughter; after applying the standard correction factor of 1.17, LMA measurements were similar.
  • (3) Just last week he said: "Maybe I'll be a bit more chilled about it this year.
  • (4) Trump might say that is what he wants to happen but for us, that’s deeply upsetting,” says Moore, who sits on the board of the Center Against Sexual and Family Violence and expects the case to have a chilling effect on reports of abuse.
  • (5) The fact that we’re tracking towards the hottest year on record should send chills through anyone who says they care about climate change – especially negotiators at the UN climate talks here in Lima,” said Samantha Smith, who heads WWF’s climate and energy initiative.
  • (6) At Weledeh Catholic School in Yellowknife, for example, it’s used to determine when to hold playtime indoors (wind chill below -30C, since you asked).
  • (7) The prime minister has talked on a number of occasions of the chilling effect the situation in the eurozone is having on our economy and the global economy."
  • (8) If a sparse crowd, shivering in suddenly chill conditions out of step with the warmth Edmonton had enjoyed in previous days, did not exactly help the atmosphere, the action remained intense.
  • (9) "In recent years, though, the increased threat of costly libel actions has begun to have a chilling effect on scientific and academic debate and investigative journalism."
  • (10) Twenty minutes after rewarming at 37 degrees C, chilled cells began to return toward normal resistance to aspiration when only 6% had recovered discoid shape.
  • (11) The main symptoms are intense headache, chills and fever and an irritating non-productive cough.
  • (12) Just after Louise Mensch asked Rupert Murdoch if he'd considered resigning over phone hacking, she received the sort of email that would chill the blood of any wannabe government minister.
  • (13) The vapor was generated by passing air over arsenolite (As2O3, s) at various flow rates and temperatures, passed through a particulate filter and then was collected in a series of chilled Greenburg-Smith impingers.
  • (14) And they kept coming … the hilarious Octodad: Dadliest Catch , the chilling psychological horror game Daylight , which again, uses procedural generation to create new environments (procedural content is another next-gen theme); and Galak-Z from 17bit Studios, described as an AI and physics-driven open-world action game.
  • (15) The first patient had one day of fever and chills after intravenous heroin use.
  • (16) The authors present a case report of a 65-year-old male with a two-day history of a painful irreducible right inguinal mass; he denied abdominal pain, nausea, vomiting, fever, or chills.
  • (17) Smith, a climate change sceptic who has also subpoenaed government scientists’ communications, has accused the attorney generals of a political witch-hunt and for causing a “chilling impact on scientific research and development”.
  • (18) These had such a chilling effect on the provision of abortion that the number carried out by medical staff collapsed in the face of warnings about long terms of imprisonment for those deemed to have broken the law .
  • (19) The concept of wind chill applies only to unprotected objects.
  • (20) Deacetylated gellan gum (Gelrite) was used to produce a bead formulation containing sulphamethizole by a hot extrusion process into chilled ethylacetate.

Mould


Definition:

  • (v.) Crumbling, soft, friable earth; esp., earth containing the remains or constituents of organic matter, and suited to the growth of plants; soil.
  • (v.) Earthy material; the matter of which anything is formed; composing substance; material.
  • (v. t.) To cover with mold or soil.
  • (n.) A growth of minute fungi of various kinds, esp. those of the great groups Hyphomycetes, and Physomycetes, forming on damp or decaying organic matter.
  • (v. t.) To cause to become moldy; to cause mold to grow upon.
  • (v. i.) To become moldy; to be covered or filled, in whole or in part, with a mold.
  • (n.) The matrix, or cavity, in which anything is shaped, and from which it takes its form; also, the body or mass containing the cavity; as, a sand mold; a jelly mold.
  • (n.) That on which, or in accordance with which, anything is modeled or formed; anything which serves to regulate the size, form, etc., as the pattern or templet used by a shipbuilder, carpenter, or mason.
  • (n.) Cast; form; shape; character.
  • (n.) A group of moldings; as, the arch mold of a porch or doorway; the pier mold of a Gothic pier, meaning the whole profile, section, or combination of parts.
  • (n.) A fontanel.
  • (n.) A frame with a wire cloth bottom, on which the pump is drained to form a sheet, in making paper by hand.
  • (v. t.) To form into a particular shape; to shape; to model; to fashion.
  • (v. t.) To ornament by molding or carving the material of; as, a molded window jamb.
  • (v. t.) To knead; as, to mold dough or bread.
  • (v. t.) To form a mold of, as in sand, in which a casting may be made.
  • () Alt. of Mouldy

Example Sentences:

  • (1) Most intriguing of all is the potential for the mould to "expect" changes in its environment.
  • (2) The median exposure of total dust was well below the Swedish threshold value, and the exposure of mould and bacteria was also low.
  • (3) We therefore used two different tRNA genes from the cellular slime mould Dictyostelium discoideum which are efficiently transcribed and processed in vivo in yeast.
  • (4) A mould which was isolated from a solution of paracetamol was identified as a Penicillium species and was found to possess the ability to utilise a series of substituted acetanilides, including paracetamol (4-hydroxyacetanilide), phenacetin (4-ethoxyacetanilide) and metacetamol (3-hydroxyacetanilide) as sole carbon sources for growth.
  • (5) Studies of substrate and cosubstrate specificities of mould alpha-glucosidases suggest that the binding site of the active center of mould alpha-glucosidase consits of two subsites--glucone and aglucone ones.
  • (6) Patients are instructed to wear the mould for 6 months, removing it only to clean or for a change of size.
  • (7) In all patients except one, specific IgE-antibodies to the respective mould were demonstrated by immunoblotting.
  • (8) In addition to mesophilic species, xerophilic moulds appear to be common, often developing together with mites.
  • (9) These antisera were characterized by immunofluorescence and by indirect enzyme-linked immunosorbent assay for their reactivity with 44 strains of moulds.
  • (10) It is recommended to apply cast fillings with a replacement of the occlusive area as quickly after the wax mould as possible because of the diminished gap due to the motion of the teeth.
  • (11) Agreement between RAST and provocation tests was 79% for the house dust mite Dermatophagoides pteronyssinus, 71.5% for cat and dog epithelium, 70% for the Penicillium mould, 63% for Alternaria, 55% for Hormodendron and Aspergillus and only 53% for house dust.
  • (12) An isotope dilution technique has been used to analyze the synthesis of metabolically stable nucleic acids during the mitotic cycle in surface plasmodia of the slime mould Physarum polycephalum.
  • (13) Reactions to moulds were observed in 9% of the patients.
  • (14) The analyses of more than 200 samples of various foods of plant origin showed that patulin was contained in 36% of the fresh and canned fruits infested with mould, and in 7% of the vegetables.
  • (15) Other kids were out there playing at whatever; I was off making something blow up and filming it, or making a mould of my sister's head using alginating plaster.
  • (16) This carnival of camera phones, caressing and even groping (the waxen men do have "moulds" where their private parts would be so that their trousers hang properly, but no, nothing too realistic down there) is the celebrity world were we in control.
  • (17) A soluble cytochrome was isolated and purified from the slime mould Physarum polycephalum and identified as cytochrome c by room-temperature and low-temperature (77 degrees K) difference spectroscopy.
  • (18) The use of fibrin as a resorbable biological adhesive permits moulding of HA granules into individually shaped implants.
  • (19) Under improvement of technology of the cobalt-base-alloy "Gisadent KCM 83", the influence of different mould temperatures to the alloy surface was inquired with help of comparism.
  • (20) As related to the control lot, the addition of these acid results, in the first two doses, in a decrease and slowing-down of the growth of the mould and the production of its two mycotoxins (patulin and byssochlamic acid).