What's the difference between crimper and pleat?

Crimper


Definition:

  • (n.) One who, or that which, crimps
  • (n.) A curved board or frame over which the upper of a boot or shoe is stretched to the required shape.
  • (n.) A device for giving hair a wavy appearance.
  • (n.) A machine for crimping or ruffling textile fabrics.

Example Sentences:

  • (1) It is the purpose of this paper to report the studies conducted on 1) different materials used for the fabrication of the screws, and 2) the significance of the variations in the jaw opening using the Simmons mechanical crimper.
  • (2) Laboratory tests on compression assemblies demonstrated that: hex-nut loosening can be produced in the laboratory by the cyclical loading of compression assemblies; crimping of the threads of the rod prevented hex-nut back-off and loosening of the SHB; crimping of the threads of the rod with the described rod crimper applied at a 90 degree angle did not damage the core of the rod or compromise its ability to withstand cyclical or tension loads; and crimping of the threads of the rod at angles other than 90 degrees damaged the core of the rod and significantly altered its ability to withstand cyclical loading.
  • (3) Today the Simmons crimper is used by the majority of orthopaedic surgeons.
  • (4) 7.54pm GMT This week Abbey is wearing a bellydancer's outfit, and has borrowed Darcey's crimpers so she looks like one of the Riddlers.

Pleat


Definition:

  • (n. & v. t.) See Plait.

Example Sentences:

  • (1) Both types of molecules are compact and globular in shape and apparently contain beta-pleated sheet conformation.
  • (2) A central eight-stranded beta-pleated sheet is the main feature of the polypeptide backbone folding in dihydrofolate reductase.
  • (3) The resulting tertiary structures are extremely Ig-like consisting of two superposed beta-pleated sheets.
  • (4) Important secondary structure elements that can be derived from the observed nuclear Overhauser effects are a large antiparallel beta-pleated sheet consisting of four strands, A, B, C, D, a segment SAB consisting of an extended region around the active-center histidine (His-15) and an alpha-helix, a half-turn between strands B and C, a segment SCD which shows no typical secondary structure, and the alpha-helical, C-terminal segment S(term).
  • (5) High-waisted flared pleated silk trousers was the key shape, in colours Saint Laurent would have approved, such as like pumpkin orange, sea green and glowing fuchia.
  • (6) Then, the skin strips were glued on alternate folds of a pleated sheet of paper, each fold of which was 0.3 cm or 0.5 cm in width.
  • (7) Both pleated septate and gap junctions were found in the immature state; their intramembranous particle (IMP) distribution was characteristic of junctions in the process of assembly, since the IMPs were irregularly and loosely arrayed in contrast with the parallel septate junctional IMP rows and gap junctional plaques found in the fully regenerated or control tissues.
  • (8) In Rhinolasius, one receptor possesses a short bulbous cilium without a rootlet, with a septate desmosome of the pleated sheet (comb) type and a weakly developed electron-dense band beneath it.
  • (9) Its secondary structure is mostly beta-structure, part of which can be visualized by electron microscopy to form a single beta-pleated sheet near the protein-lipid interface of the trimer.
  • (10) It possesses an alternating motif of hydrophilic sequences that can potentially be folded into alpha-helices and hydrophobic sequences that can potentially be folded into beta-pleated sheets.
  • (11) In addition, most of the autoreactive hybridomas also demonstrated inhibition of reactivity to mutations in the amino half of the first domain of the I-A alpha- and beta-chains, which encodes the beta-pleated sheet of the floor of the Ag-binding groove.
  • (12) 25.4 cm) fiberglass depth cartridge and a 10-inch pleated epoxy-fiberglass filter in a series at flow rates of up to 37.8 liters (10 gallons) per min.
  • (13) In the absence of Ca2+ and in the presence of [ethylenebis(oxoethylenenitrilo)]tetraacetic acid (EGTA), the protein contains 30-35% alpha helix, 50% random coil, and 15-20% beta-pleated sheat.
  • (14) analyses of the single domains and the scTCR indicate that they are folded into beta-pleated sheet structures similar to those of immunoglobulin variable domains.
  • (15) The rules predict the absence of alpha helix and beta pleated sheets in the structure of this peptide.
  • (16) Early myotube retraction was accompanied by accentuation of the longitudinally oriented surface pleats and appearance of "blebs" followed by cell-rounding.
  • (17) In the case of the apolipoproteins, the knowledge of their primary structure has facilitated the study of their physicochemical properties in solution and at the air-water interface and has also permitted realistic predictions of the two dimensional organization, not only of their alpha-helical segments but also of the beta-pleated sheets, random coil and beta-turns, all of which have amphipathic properties.
  • (18) Its first 120 amino acids form a central five-stranded, beta-pleated sheet surrounded by five alpha helices.
  • (19) The antiparallel peptide strands are distorted from a regularly pleated sheet, caused mainly by the L-Ala residue in which phi = -155 degrees and psi = 162 degrees.
  • (20) The ledges of some pleats partly grow toward each other as ring like diaphragms, leaving openings whose boundary is composed of alveolar epithelium separated by a basal lamina from a connective tissue sheath with capillaries.