(v. i.) To burst or break forth with a sudden and transient flood of flame and light; as, the lighting flashes vividly; the powder flashed.
(v. i.) To break forth, as a sudden flood of light; to burst instantly and brightly on the sight; to show a momentary brilliancy; to come or pass like a flash.
(v. i.) To burst forth like a sudden flame; to break out violently; to rush hastily.
(v. t.) To send out in flashes; to cause to burst forth with sudden flame or light.
(v. t.) To convey as by a flash; to light up, as by a sudden flame or light; as, to flash a message along the wires; to flash conviction on the mind.
(v. t.) To cover with a thin layer, as objects of glass with glass of a different color. See Flashing, n., 3 (b).
(n.) To trick up in a showy manner.
(n.) To strike and throw up large bodies of water from the surface; to splash.
(n.) A sudden burst of light; a flood of light instantaneously appearing and disappearing; a momentary blaze; as, a flash of lightning.
(n.) A sudden and brilliant burst, as of wit or genius; a momentary brightness or show.
(n.) The time during which a flash is visible; an instant; a very brief period.
(n.) A preparation of capsicum, burnt sugar, etc., for coloring and giving a fictious strength to liquors.
(a.) Showy, but counterfeit; cheap, pretentious, and vulgar; as, flash jewelry; flash finery.
(a.) Wearing showy, counterfeit ornaments; vulgarly pretentious; as, flash people; flash men or women; -- applied especially to thieves, gamblers, and prostitutes that dress in a showy way and wear much cheap jewelry.
(n.) Slang or cant of thieves and prostitutes.
(n.) A pool.
(n.) A reservoir and sluiceway beside a navigable stream, just above a shoal, so that the stream may pour in water as boats pass, and thus bear them over the shoal.
Example Sentences:
(1) Osman had gone close before that, flashing a shot over from seven yards after a corner.
(2) The data indicate that hot flashes may start much earlier and continue far longer than is commonly recognized by physicians or acknowledged in textbooks of gynecology.
(3) 'frequent' and probability of 'rare' flashes was 20%.
(4) All are satisfied by [Formula: see text], where N is the size of rod signal, constant for threshold; theta, theta(D) are steady backgrounds of light and receptor noise; varphi is the threshold flash with sigma a constant of about 2.5 log td sec; B the fraction of pigment in the bleached state.
(5) The flash visually evoked cortical potential (VECP) was recorded in 18 human albinos.
(6) The mixed-valence-state cytochrome oxidase mixed with O2 at -24 degrees C and flash-photolysed at -60 to -100 degrees C reacts with O2 and initially forms an oxy compound (A2) similar to that formed from the fully reduced state (A1).
(7) Dementia produced a slowing of the major positive (P2) component of the flash VEP but did not affect the latency of the flash P1 component or the P100 pattern-reversal component.
(8) We have investigated the relationship between rhodopsin photochemical function and the retinal rod outer segment (ROS) disk membrane lipid composition using flash photolysis techniques.
(9) The signal recovers rapidly (approximately 90 s) and can be repeated in a succession of flashes.
(10) Repeated flashes above a few per second do not so much cause fatigue of the VEPs as reduce or prevent them by a sustained inhibition; large late waves are released as a rebound excitation any time the train of flashes stops or is delayed or sufficiently weakened.
(11) Three types of behavior of the compound eye of Daphnia magna are characterized: 'flick', a transient rotation elicited by a brief flash of light; 'fixation', a maintained eye orientation in response to a stationary light stimulus of long-duration; 'tracking', the smooth pursuit of a moving stimulus.
(12) The instrument is based on an established procedure for dark adaptation measurement in which the subject continuously adjusts the threshold luminance of a recurrently flashing stimulus.
(13) Justice League, a followup to Dawn of Justice featuring Batman, Superman and Wonder Woman, arrives in May 2017, with a film starring Flash and the Green Lantern debuting the following Christmas.
(14) A 300 mus decay component of ESR Signal I (P-700+) in chloroplasts is observed following a 10 mus actinic xenon flash.
(15) A comparative study is made, at 15 degrees C, of flash-induced absorption changes around 820 nm (attributed to the primary donors of Photosystems I and II) and 705 nm (Photosystem I only), in normal chloroplasts and in chloroplasts where O2 evolution was inhibited by low pH or by Tris-treatment.
(16) In the presence of dextran sulphate the recombination of hemoglobin with carbon monoxide after flash photolysis is biphasic and the fraction of quickly reacting material increases with dilution of the protein.
(17) For all its posing and grooming, there are no nightclubs - the only flashing lights along this coast are the glowworms strobing across the grass at dusk.
(18) It was a wonderful piece of close control from Cassano, taking out two defenders in one movement, and Balotelli was quicker and more decisive than his marker, Holger Badstuber, to flash his header past Neuer.
(19) The visibility of a 1 degree, 200-msec flash on a large yellow field was measured as a function of the intensity of a coincident pedestal flash (a flash that was the same in both temporal intervals of a two-alternative forced-choice trial).
(20) The mean firing rates were significantly altered by either electrical or flash stimuli repeated 500 times at 0.97 Hz in those units which showed no transitory response.
Mould
Definition:
(v.) Crumbling, soft, friable earth; esp., earth containing the remains or constituents of organic matter, and suited to the growth of plants; soil.
(v.) Earthy material; the matter of which anything is formed; composing substance; material.
(v. t.) To cover with mold or soil.
(n.) A growth of minute fungi of various kinds, esp. those of the great groups Hyphomycetes, and Physomycetes, forming on damp or decaying organic matter.
(v. t.) To cause to become moldy; to cause mold to grow upon.
(v. i.) To become moldy; to be covered or filled, in whole or in part, with a mold.
(n.) The matrix, or cavity, in which anything is shaped, and from which it takes its form; also, the body or mass containing the cavity; as, a sand mold; a jelly mold.
(n.) That on which, or in accordance with which, anything is modeled or formed; anything which serves to regulate the size, form, etc., as the pattern or templet used by a shipbuilder, carpenter, or mason.
(n.) Cast; form; shape; character.
(n.) A group of moldings; as, the arch mold of a porch or doorway; the pier mold of a Gothic pier, meaning the whole profile, section, or combination of parts.
(n.) A fontanel.
(n.) A frame with a wire cloth bottom, on which the pump is drained to form a sheet, in making paper by hand.
(v. t.) To form into a particular shape; to shape; to model; to fashion.
(v. t.) To ornament by molding or carving the material of; as, a molded window jamb.
(v. t.) To knead; as, to mold dough or bread.
(v. t.) To form a mold of, as in sand, in which a casting may be made.
() Alt. of Mouldy
Example Sentences:
(1) Most intriguing of all is the potential for the mould to "expect" changes in its environment.
(2) The median exposure of total dust was well below the Swedish threshold value, and the exposure of mould and bacteria was also low.
(3) We therefore used two different tRNA genes from the cellular slime mould Dictyostelium discoideum which are efficiently transcribed and processed in vivo in yeast.
(4) A mould which was isolated from a solution of paracetamol was identified as a Penicillium species and was found to possess the ability to utilise a series of substituted acetanilides, including paracetamol (4-hydroxyacetanilide), phenacetin (4-ethoxyacetanilide) and metacetamol (3-hydroxyacetanilide) as sole carbon sources for growth.
(5) Studies of substrate and cosubstrate specificities of mould alpha-glucosidases suggest that the binding site of the active center of mould alpha-glucosidase consits of two subsites--glucone and aglucone ones.
(6) Patients are instructed to wear the mould for 6 months, removing it only to clean or for a change of size.
(7) In all patients except one, specific IgE-antibodies to the respective mould were demonstrated by immunoblotting.
(8) In addition to mesophilic species, xerophilic moulds appear to be common, often developing together with mites.
(9) These antisera were characterized by immunofluorescence and by indirect enzyme-linked immunosorbent assay for their reactivity with 44 strains of moulds.
(10) It is recommended to apply cast fillings with a replacement of the occlusive area as quickly after the wax mould as possible because of the diminished gap due to the motion of the teeth.
(11) Agreement between RAST and provocation tests was 79% for the house dust mite Dermatophagoides pteronyssinus, 71.5% for cat and dog epithelium, 70% for the Penicillium mould, 63% for Alternaria, 55% for Hormodendron and Aspergillus and only 53% for house dust.
(12) An isotope dilution technique has been used to analyze the synthesis of metabolically stable nucleic acids during the mitotic cycle in surface plasmodia of the slime mould Physarum polycephalum.
(13) Reactions to moulds were observed in 9% of the patients.
(14) The analyses of more than 200 samples of various foods of plant origin showed that patulin was contained in 36% of the fresh and canned fruits infested with mould, and in 7% of the vegetables.
(15) Other kids were out there playing at whatever; I was off making something blow up and filming it, or making a mould of my sister's head using alginating plaster.
(16) This carnival of camera phones, caressing and even groping (the waxen men do have "moulds" where their private parts would be so that their trousers hang properly, but no, nothing too realistic down there) is the celebrity world were we in control.
(17) A soluble cytochrome was isolated and purified from the slime mould Physarum polycephalum and identified as cytochrome c by room-temperature and low-temperature (77 degrees K) difference spectroscopy.
(18) The use of fibrin as a resorbable biological adhesive permits moulding of HA granules into individually shaped implants.
(19) Under improvement of technology of the cobalt-base-alloy "Gisadent KCM 83", the influence of different mould temperatures to the alloy surface was inquired with help of comparism.
(20) As related to the control lot, the addition of these acid results, in the first two doses, in a decrease and slowing-down of the growth of the mould and the production of its two mycotoxins (patulin and byssochlamic acid).