What's the difference between lathe and rathe?

Lathe


Definition:

  • (n.) Formerly, a part or division of a county among the Anglo-Saxons. At present it consists of four or five hundreds, and is confined to the county of Kent.
  • (n.) A granary; a barn.
  • (n.) A machine for turning, that is, for shaping articles of wood, metal, or other material, by causing them to revolve while acted upon by a cutting tool.
  • (n.) The movable swing frame of a loom, carrying the reed for separating the warp threads and beating up the weft; -- called also lay and batten.

Example Sentences:

  • (1) One had been attached to the first cutting lathe that Optimal had acquired.
  • (2) Through combination with a spherical disc face perpendicular to the axis of rotation, which protrudes only slightly from the hemispherical catheter tip, with a maximum at the center and minimum at the lateral borders, the lathing head has only a slight risk of perforation and no undesired sheering forces (Figures 2a to 2d).
  • (3) Machinable ceramics that can be cut and even lathed have recently been developed in industry.
  • (4) We studied the anterior surfaces of 30 soft contact lenses (10 lathe cut [polished]; 10 spin cast [unpolished], and 10 cast molded [unpolished]) of the same polymer and water content.
  • (5) The results indicate that when dental amalgam alloy is added to the glass ionomer, lathe-cut particles are to be preferred but only in an amount up to 20% by weight.
  • (6) Changes in corneal curvature and subjective refraction were found to occur in some wearers of N & N lathe-cut soft contact lenses.
  • (7) Peripheral swelling was less than central for both lathe cut- and spun cast-type lenses.
  • (8) For clinical application the initial intumescence should be taken into consideration, as well as the donor tissue thickening during its freezing for working on a lathe.
  • (9) Data is presented in respect of 256 restorations of Occlusin and 69 restorations of a conventional lathe cut amalgam.
  • (10) The lenses studied were lathe-cut polymethylmethacrylate (PMMA), injection-molded non-UV PMMA, injection-molded UV PMMA, and cast-molded UV PMMA.
  • (11) Measurement of the corrosion rates of three distinctive amalgam alloys (lathe-cut, spherical and dispersed-phase) when immersed in three different electrolytes, including saliva, is reported.
  • (12) The results indicated that early microleakage from alloys of lathe-cut particles was lower than that from alloys of spherical particles in both low-copper and high-copper amalgam restorations.
  • (13) Precise lathing of epikeratoplasty lenticules is difficult to achieve with the cryolathe due to unpredictable expansion of the lathing tools and the corneal tissue during the freezing process.
  • (14) Like, ‘Don’t send us a CD master of the loudest techno music and expect that to be cuttable on a lacquer.’ (The high and low frequencies associated with this type of music can overheat the cutting lathe and cause the mastering machinery to shut down; pushing the process to its limits is the origin of some records being called “hot cuts”.)
  • (15) Often overlooked is the dental laboratory of which particular interest focuses on the lathes used in preparing prosthetic appliances, castings, orthodontic appliances, and surgical stents.
  • (16) A method was developed for lathing corneal tissue without freezing.
  • (17) This paper describes in detail the geometry of the first lathe-cut hydrophilic lens approved by the Federal Drug Administration, the fitting methods utilizing trial lenses, and the results of 100 patients successfully fitted.
  • (18) We adapted a lathe to the production of keratolenses.
  • (19) USA 69, 3643-3647) and the HLP-1 protein (Lathe, R. et al.
  • (20) Three out of 10 eyes (30%) in which injection molded anterior chamber lenses from McGhan were used developed cystoid macular edema, compared to a much lower incidence with the use of lathe-cut anterior chamber lenses from Rayner.

Rathe


Definition:

  • (a.) Coming before others, or before the usual time; early.
  • (adv.) Early; soon; betimes.

Example Sentences:

  • (1) It was written during the second world war and inspired by the murder in Paris of German diplomat Ernst vom Rath by Jewish teenager Herschel Grynszpan .
  • (2) Our investigations have following results: In the Rath-von Verschuer family, which is so extraordinary that the authenticity sometimes had been doubted, we found that crossing overs which were present in 50% of the cases were shown by the combination of protan defect and haemophilia B.
  • (3) This is exactly what happened when the Guardian and Ben Goldacre were sued for libel by vitamin manufacturer Matthias Rath , who had published adverts in South Africa denouncing Aids drugs as ineffective, while promoting his own supplements.
  • (4) By electrokaryotyping we found that all seven genes are located on different chromosomes: MEL1 on chromosome II as shown previously by Voll-rath et al.
  • (5) In a previous paper (Rath, H. M., Doyle, G. A. R., and Silbert, D. F. (1989) J. Biol.
  • (6) "So what we're going to do is get a volunteer up on stage to guess whether the next card detailing an item of Conservative or Labour council waste is higher or lower than the one before," said Rathe.
  • (7) The MF alpha 2-encoded Asn-5,Arg-7 alpha-factor-like peptide has been shown shown to have similar activity to Gln-5,Lys-7 alpha-factor in morphogenesis and growth arrest studies (S. Raths, P. Shenbagamurthi, F. Naider, and J. M. Becker, J. Bacteriol.
  • (8) No matter, because Rathe had some heartwarming soundbites from members giving their reason for joining the party.
  • (9) #BritishThreatLevels May 24, 2017 Ben Rathe (@benrathe) "Can you move down please?"
  • (10) There have been other cases, including Keith Schellenberg, a multi-millionaire who bought a Scottish island, but didn't get on with the islanders; with Matthias Rath, who peddled vitamins as a treatment for HIV; and with Elton John, who had a sense of humour failure at a harmless piece of parody – a case involving fair comment.
  • (11) "I'm Austin Rathe, head of membership and supporters," said a young man who looked as if he might have had to produce ID to get into the club.

Words possibly related to "rathe"