(n.) Formerly, a part or division of a county among the Anglo-Saxons. At present it consists of four or five hundreds, and is confined to the county of Kent.
(n.) A granary; a barn.
(n.) A machine for turning, that is, for shaping articles of wood, metal, or other material, by causing them to revolve while acted upon by a cutting tool.
(n.) The movable swing frame of a loom, carrying the reed for separating the warp threads and beating up the weft; -- called also lay and batten.
Example Sentences:
(1) One had been attached to the first cutting lathe that Optimal had acquired.
(2) Through combination with a spherical disc face perpendicular to the axis of rotation, which protrudes only slightly from the hemispherical catheter tip, with a maximum at the center and minimum at the lateral borders, the lathing head has only a slight risk of perforation and no undesired sheering forces (Figures 2a to 2d).
(3) Machinable ceramics that can be cut and even lathed have recently been developed in industry.
(4) We studied the anterior surfaces of 30 soft contact lenses (10 lathe cut [polished]; 10 spin cast [unpolished], and 10 cast molded [unpolished]) of the same polymer and water content.
(5) The results indicate that when dental amalgam alloy is added to the glass ionomer, lathe-cut particles are to be preferred but only in an amount up to 20% by weight.
(6) Changes in corneal curvature and subjective refraction were found to occur in some wearers of N & N lathe-cut soft contact lenses.
(7) Peripheral swelling was less than central for both lathe cut- and spun cast-type lenses.
(8) For clinical application the initial intumescence should be taken into consideration, as well as the donor tissue thickening during its freezing for working on a lathe.
(9) Data is presented in respect of 256 restorations of Occlusin and 69 restorations of a conventional lathe cut amalgam.
(10) The lenses studied were lathe-cut polymethylmethacrylate (PMMA), injection-molded non-UV PMMA, injection-molded UV PMMA, and cast-molded UV PMMA.
(11) Measurement of the corrosion rates of three distinctive amalgam alloys (lathe-cut, spherical and dispersed-phase) when immersed in three different electrolytes, including saliva, is reported.
(12) The results indicated that early microleakage from alloys of lathe-cut particles was lower than that from alloys of spherical particles in both low-copper and high-copper amalgam restorations.
(13) Precise lathing of epikeratoplasty lenticules is difficult to achieve with the cryolathe due to unpredictable expansion of the lathing tools and the corneal tissue during the freezing process.
(14) Like, ‘Don’t send us a CD master of the loudest techno music and expect that to be cuttable on a lacquer.’ (The high and low frequencies associated with this type of music can overheat the cutting lathe and cause the mastering machinery to shut down; pushing the process to its limits is the origin of some records being called “hot cuts”.)
(15) Often overlooked is the dental laboratory of which particular interest focuses on the lathes used in preparing prosthetic appliances, castings, orthodontic appliances, and surgical stents.
(16) A method was developed for lathing corneal tissue without freezing.
(17) This paper describes in detail the geometry of the first lathe-cut hydrophilic lens approved by the Federal Drug Administration, the fitting methods utilizing trial lenses, and the results of 100 patients successfully fitted.
(18) We adapted a lathe to the production of keratolenses.
(19) USA 69, 3643-3647) and the HLP-1 protein (Lathe, R. et al.
(20) Three out of 10 eyes (30%) in which injection molded anterior chamber lenses from McGhan were used developed cystoid macular edema, compared to a much lower incidence with the use of lathe-cut anterior chamber lenses from Rayner.
Rotate
Definition:
(a.) Having the parts spreading out like a wheel; wheel-shaped; as, a rotate spicule or scale; a rotate corolla, i.e., a monopetalous corolla with a flattish border, and no tube or a very short one.
(v. i.) To turn, as a wheel, round an axis; to revolve.
(v. i.) To perform any act, function, or operation in turn, to hold office in turn; as, to rotate in office.
(v. i.) To cause to turn round or revolve, as a wheel around an axle.
(v. i.) To cause to succeed in turn; esp., to cause to succeed some one, or to be succeeded by some one, in office.
Example Sentences:
(1) To determine the accuracy of double-contrast arthrography in complete rotator cuff tears, we studied 805 patients thought to have a complete rotator cuff tear who had undergone double-contrast shoulder arthrography (DCSA) between 1978 and 1983.
(2) When the posterior capsule was sectioned, no significant changes were noted in the severity of the sag or the rotation.
(3) The Ta loop was a smooth, elongated ellipse in configuration and showed clockwise rotation in all planes, as did the P loop.
(4) With this system, a brain region loaded with fura-2 was illuminated by a rotating disc bearing three different interference filters of 340, 360 and 380 nm at a rate of 600 rpm.
(5) The automatic half of both the motor which advances the trepan as well as the second motor which rotates the trepan is triggered by the sudden change in electrical resistance between the trepan and the patient's internal body fluid, at the final stage of penetration.
(6) This series of tests included tests for pathologic nystagmus, saccades, smooth pursuit, and optokinetic nystagmus, as well as bithermal caloric testing and rotational testing.
(7) The adherence of 51Cr-labeled platelets to rabbit aortae everted on probes rotated in platelet-red cell suspensions has been measured.
(8) We have used a modification of the rotating-frame imaging technique to measure PCr-to-ATP ratio non-invasively in human heart.
(9) Experimental evidence suggested that nucleosome rotational positioning is determined by the DNA sequence itself.
(10) The X-ray tube rotates outside the detector array at the rate of one revolution per second.
(11) The data collection scheme for the scanner uses multiple rotations of a linearly shifted, asymmetric fan beam permitting user-defined variable resolution.
(12) The purity and configuration of each isomer of the free acid and N-chloroacetylated derivative were ascertained by: (a) paper chromatography in five solvent systems, (b) elemental analysis, (c) Van Slyke nitrous acid determination of alpha-carbonyl carbon, and (d) Van Slyke ninhydrin determination of alpha-carbonyl carbon, and (e) optical rotation.
(13) Based on our experience with the mark I prosthesis we have designed and developed a mark II model which has freedom of axial rotation of the saddle.
(14) The reported study demonstrates that performance asymmetries between normal or reflected letters presented in the right and left visual field favors the right visual field when stimulus patterns are blocked and rotated 90 degrees clockwise and favors the left visual field when they are blocked and rotated 90 degrees counterclockwise.
(15) Moreover, the majority of the 'out of phase' units showed an increased discharge during side-up animal tilt and side-down neck rotation.
(16) 3-D curves were computed with an apparent rotation around the vertical axis Z.
(17) Subsequently, due to the rotation of the original polar axis in one hemisphere, the third cleavage plane through one half of the egg is transverse to the third cleavage plane through the other half.
(18) This suggests that S1 is a flexible protein with at least two domains that can rotate independently.
(19) Per-rotational nystagmus was recorded in rabbits with unilaterally narrowed vertebral arteries or following unilateral cervical sympathectomies.
(20) We found that the Gallie system generally allowed significantly more rotation in flexion, extension, axial rotation, and lateral bending than the other three fixation techniques.