(n.) The act or process of shaping in or on a mold, or of making molds; the art or occupation of a molder.
(n.) Anything cast in a mold, or which appears to be so, as grooved or ornamental bars of wood or metal.
(n.) A plane, or curved, narrow surface, either sunk or projecting, used for decoration by means of the lights and shades upon its surface. Moldings vary greatly in pattern, and are generally used in groups, the different members of each group projecting or retreating, one beyond another. See Cable, n., 3, and Crenelated molding, under Crenelate, v. t.
(p.a.) Used in making a mold or moldings; used in shaping anything according to a pattern.
Example Sentences:
(1) Most intriguing of all is the potential for the mould to "expect" changes in its environment.
(2) The median exposure of total dust was well below the Swedish threshold value, and the exposure of mould and bacteria was also low.
(3) We therefore used two different tRNA genes from the cellular slime mould Dictyostelium discoideum which are efficiently transcribed and processed in vivo in yeast.
(4) A mould which was isolated from a solution of paracetamol was identified as a Penicillium species and was found to possess the ability to utilise a series of substituted acetanilides, including paracetamol (4-hydroxyacetanilide), phenacetin (4-ethoxyacetanilide) and metacetamol (3-hydroxyacetanilide) as sole carbon sources for growth.
(5) Studies of substrate and cosubstrate specificities of mould alpha-glucosidases suggest that the binding site of the active center of mould alpha-glucosidase consits of two subsites--glucone and aglucone ones.
(6) Patients are instructed to wear the mould for 6 months, removing it only to clean or for a change of size.
(7) In all patients except one, specific IgE-antibodies to the respective mould were demonstrated by immunoblotting.
(8) In addition to mesophilic species, xerophilic moulds appear to be common, often developing together with mites.
(9) These antisera were characterized by immunofluorescence and by indirect enzyme-linked immunosorbent assay for their reactivity with 44 strains of moulds.
(10) It is recommended to apply cast fillings with a replacement of the occlusive area as quickly after the wax mould as possible because of the diminished gap due to the motion of the teeth.
(11) Agreement between RAST and provocation tests was 79% for the house dust mite Dermatophagoides pteronyssinus, 71.5% for cat and dog epithelium, 70% for the Penicillium mould, 63% for Alternaria, 55% for Hormodendron and Aspergillus and only 53% for house dust.
(12) An isotope dilution technique has been used to analyze the synthesis of metabolically stable nucleic acids during the mitotic cycle in surface plasmodia of the slime mould Physarum polycephalum.
(13) Reactions to moulds were observed in 9% of the patients.
(14) The analyses of more than 200 samples of various foods of plant origin showed that patulin was contained in 36% of the fresh and canned fruits infested with mould, and in 7% of the vegetables.
(15) Other kids were out there playing at whatever; I was off making something blow up and filming it, or making a mould of my sister's head using alginating plaster.
(16) This carnival of camera phones, caressing and even groping (the waxen men do have "moulds" where their private parts would be so that their trousers hang properly, but no, nothing too realistic down there) is the celebrity world were we in control.
(17) A soluble cytochrome was isolated and purified from the slime mould Physarum polycephalum and identified as cytochrome c by room-temperature and low-temperature (77 degrees K) difference spectroscopy.
(18) The use of fibrin as a resorbable biological adhesive permits moulding of HA granules into individually shaped implants.
(19) Under improvement of technology of the cobalt-base-alloy "Gisadent KCM 83", the influence of different mould temperatures to the alloy surface was inquired with help of comparism.
(20) As related to the control lot, the addition of these acid results, in the first two doses, in a decrease and slowing-down of the growth of the mould and the production of its two mycotoxins (patulin and byssochlamic acid).
Umbo
Definition:
(n.) The boss of a shield, at or near the middle, and usually projecting, sometimes in a sharp spike.
(n.) A boss, or rounded elevation, or a corresponding depression, in a palate, disk, or membrane; as, the umbo in the integument of the larvae of echinoderms or in the tympanic membrane of the ear.
(n.) One of the lateral prominence just above the hinge of a bivalve shell.
Example Sentences:
(1) The position, displacement and phase angle of the rotation axis of the ossicles was calculated based on the displacement and phase angle of the umbo, malleus head and lenticular process.
(2) The bending will also affect the displacements transmitted to the ossicular load, and introduce significant errors into estimates of such displacements based on measurements of umbo displacement even at frequencies as low as a few kHz.
(3) The umbo region may represent the center of superficially radial dispersion.
(4) The epithelial migration center was found at the region of umbo, manubrium, and the short process of the malleus.
(5) It is demonstrated that the rotation angels can not account for the measured movement of the umbo, which leads to the conclusion that for static high pressure levels the classical hypothesis of rotation around a fixed axis has to be abandoned.
(6) There is a small area we have termed the "slow zone", located anterior and inferior to the umbo, that has comparatively fewer patches and where ink dots can remain static for several weeks.
(7) This attachment is most intimate at the level of the umbo and becomes progressively more tenuous as the short process is approached.
(8) It is shown further that a linear relationship between umbo displacement and volume displacement exists.
(9) The acoustically estimated "drum location" generally lay between the optically determined vertical planes containing the TOD and the umbo.
(10) The displacement of the umbo is compared to other work.
(11) All of the modifications (except the perforation) had a minimal effect on umbo displacement; this seems to imply that the pars flaccida has a minor acoustic role in human beings.
(12) Due to the gliding movement in the malleus-incus joint, this motion changes at the umbo into outward rotation, counteracting the tensor tympani muscle.
(13) When the motion is rotational the position of the axis of rotation shifts with frequency, the shifts are so large that the axis can lie near the umbo so that amplitudes at the processus lateralis are larger than at the umbo.
(14) The umbo moved piston-like at 0.1-0.8 kHz and 2.6-4.5 kHz but in an ellipse at 1.0-2.4 kHz.
(15) The vibration amplitude and phase angle of the umbo, malleus head, lenticular process and stapes head were measured at 19 frequencies between 0.1 kHz and 4.5 kHz.
(16) The malleus head showed elliptical movement with its long axis anteriorly tilted around 45 degrees from the direction of the umbo vibration at 0.1 kHz.
(17) As a result of the bending, the frequency response at the umbo at high frequencies displays much higher amplitudes and larger phase lags than when the manubrium is rigid.
(18) The effects of aditus blockage, decrease of tympanic cavity volume, and resection of the tensor tympani muscle on umbo displacement were studied in human temporal bones using a new non-contacting video measuring system.
(19) The umbo, lenticular process and stapes head vibrated parallel at lower frequencies.
(20) The three-dimensional movements of the umbo, the proc.