What's the difference between alloy and titanium?

Alloy


Definition:

  • (v. t.) Any combination or compound of metals fused together; a mixture of metals; for example, brass, which is an alloy of copper and zinc. But when mercury is one of the metals, the compound is called an amalgam.
  • (v. t.) The quality, or comparative purity, of gold or silver; fineness.
  • (v. t.) A baser metal mixed with a finer.
  • (v. t.) Admixture of anything which lessens the value or detracts from; as, no happiness is without alloy.
  • (v. t.) To reduce the purity of by mixing with a less valuable substance; as, to alloy gold with silver or copper, or silver with copper.
  • (v. t.) To mix, as metals, so as to form a compound.
  • (v. t.) To abate, impair, or debase by mixture; to allay; as, to alloy pleasure with misfortunes.
  • (v. t.) To form a metallic compound.

Example Sentences:

  • (1) Sulphides, which possibly form on silver alloys, showed cytotoxicity.
  • (2) The influence of mucin on the corrosion behaviour of seven typical dental casting alloys was investigated.
  • (3) Tests were undertaken to study resistance to tears in laser welded dental metal alloys.
  • (4) Increased wear-resistance of microsurgical instruments by facing, electric spark alloying and vacuum surfacing increases the working life of the instruments by 1.5-3 times.
  • (5) Pitting corrosion was seen on low-resistant Ni-Cr alloys, which had less Cr content.
  • (6) One alloy tested contained 5% indium, and the second alloy contained 10% indium.
  • (7) Such failures can easily be avoided by using only one alloy with good passivation characteristics instead of different alloys.
  • (8) The investment containing 2.0 wt% NbC showed nearly the same casting accuracy for Ni-Cr alloys for metal-ceramic restoration as the commercial phosphate-bonded investment.
  • (9) It was determined that the Ag-rich phase of Ag-Pd-Cu-Au alloy was preferentially attacked to form Ag2S corrosion product.
  • (10) The current literature, for the most part, cites the use of noble alloys as controls for trials of alternative materials.
  • (11) Titanium-nickel alloy composed of 50% by weight of each metal has unique thermal shape-memory properties, with a transition temperature of 20 degrees C. Each stent consists of one wire with a diameter of 0.9 mm.
  • (12) Irrespective of the coated dental alloy, the coatings have pores, through which the electrolyte is in contact with the substrate material.
  • (13) Forty BIAS femoral stems had heads made of Co-base F 75 alloy and 18 Gustilo-Kyle femoral stems had Ti6A14V alloy heads.
  • (14) The occurrence of marginal spaces between the resin facing and gold alloy framework in 176 crowns and bridge retainers was studied.
  • (15) Base metal alloys, principally made of nickel, chromium, and beryllium have gained widespread usage, especially in the United States, due to their lower cost and higher mechanical properties.
  • (16) The amounts of polyethylene and methylmethacrylate debris and the histological reactions in the tissues corresponded closely with those reported in earlier studies of total hip prostheses made of stainless steel or cobalt-chromium alloy.
  • (17) The bond strength of the specimens brazed with the non-precious alloy was largely unaffected.
  • (18) The traditional alloys used as metal bases for fixed partial dentures are accompanied by various problems such as corrosion, allergy, toxicity, casting, and preparation for both patient and prosthodontist and in magnetic resonance imaging for diagnosis.
  • (19) The results revealed that experimental alloys inherited high early and final strength values without any significant change in their microstructure.
  • (20) The surface of dental alloys, on which such a composite plating was made, was analyzed by ESCA.

Titanium


Definition:

  • (n.) An elementary substance found combined in the minerals manaccanite, rutile, sphene, etc., and isolated as an infusible iron-gray amorphous powder, having a metallic luster. It burns when heated in the air. Symbol Ti. Atomic weight 48.1.

Example Sentences:

  • (1) The femoral component, made of Tivanium with titanium mesh attached to it by a new process called diffusion bonding, retains superalloy fatigue strength characteristics.
  • (2) Previous work has shown that corticocancellous bone chips placed in a titanium chamber with an arteriovenous vascular pedicle will result in a pre-formed vascularized bone graft.
  • (3) Since the introduction of osseointegrated titanium implants for bone-anchored facial and dental prostheses, an increasing number of irradiated patients are being treated with this technique.
  • (4) A knee simulator was used to study the wear of carbon fiber reinforced UHMWPE (Poly Two) (Poly Two is a registered trademark of Zimmer, USA) tibial and patellar components against Ti-6A1-4V, titanium nitride (TiN)-coated Ti-6A1-4V, and cobalt-chromium-molybdenum femoral components.
  • (5) Using the osseointegration method, a prospective study was conducted involving seven adult patients who were treated with titanium implants used as rigid anchorage units.
  • (6) Titanium-nickel alloy composed of 50% by weight of each metal has unique thermal shape-memory properties, with a transition temperature of 20 degrees C. Each stent consists of one wire with a diameter of 0.9 mm.
  • (7) New light-curable adhesive opaque resins were prepared using 4-methacryloxyethyl trimellitate anhydride (4-META), triethylene glycol dimethacrylate (TEGDMA), di (methacryloxyethyl) trimethylhexamethylene diurethane (UDMA) and titanium dioxide.
  • (8) X-ray microprobe analysis identified particles which related to the known exposures, superimposed on a background of other particles related to smoking (kaolinite and mica) or to the general environment (silicon, titanium, and iron).
  • (9) The nickel-titanium wires, however, showed a clear deviation form the linearity with a curviform course.
  • (10) We present eight cases of chemical burns of the eyes from titanium tetrachloride, an acidic corrosive liquid.
  • (11) The difficulties encountered in casting titanium and its alloys have until recently hindered any widespread use of titanium in restorative dentistry.
  • (12) A prospective controlled study was undertaken in which in 100 children a titanium ventilation tube was inserted in one ear, and a Paparella silicone tube was inserted in the contralateral ear as a control.
  • (13) Results demonstrated excellent bone adaptation to both titanium and ceramic implants.
  • (14) A new process of plasma-spraying hydroxyapatite--an entirely biocompatible, bioceramic material--onto porous, titanium alloy components promotes bone ingrowth into the components resulting in implant fixation, which is superior to current methods of cemented or cementless fixation.
  • (15) The titanium alloy strips were treated with citric acid, stannous fluoride, tetracycline HCl, chlorhexidine gluconate, hydrogen peroxide, chloramine T, sterile water, a plastic sonic scaler tip, and an air-powder abrasive unit.
  • (16) In vitro tests demonstrated approximately sevenfold greater filter length shortening (a measure of filter splaying) for the titanium GF in response to a given applied load.
  • (17) It was found that Ti(IV) inhibited oxidation when the substrate, procarbazine, was coordinated to titanium.
  • (18) In the case of titanium there were no cells in the interface which consisted instead of a proteoglycan layer of about 200-400 A width.
  • (19) An uncommon complication of percutaneous insertion of the titanium Greenfield filter is angulation at discharge with clustering of the limbs to one side of the vena cava.
  • (20) Plasma protein exchange reactions were also studied on hydrophilic titanium (Ti), vanadium (V), and silver (Ag) surfaces.