(a.) Having an angle or angles; -- used in compounds; as, right-angled, many-angled, etc.
Example Sentences:
(1) A slight varus angle of 2.1 degrees became apparent.
(2) The optimal size for stimulation was between 5 degrees and 12 degrees (visual angle).
(3) The dependence of fluorescence polarization of stained nerve fibres on the angle between the fibre axis and electrical vector of exciting light (azimuth characteristics) has been considered.
(4) Contact angles of Silafocon A and PMMA were relatively uninfluenced by front surface radii between 7.7 and 8.85 and 7.3 to 8.8 mm, respectively.
(5) Angle closure glaucoma is a well-known complication of scleral buckling and it is of particular interest when it occurs in eyes with previously normal angles.
(6) Projection obliquity resulted in consistent underestimation of DPR angle.
(7) Instead of later renal failure and, of course, mental retardation, it was the histological features of the fetus eyes which permit to diagnose and exhibit both congenital cataract and irido-corneal angle dysgenesis.
(8) The superior mesenteric artery and the abdominal aorta made the mean angle of 35.5 degree in patients with normal left renal vein, the mean angle of 45.4 degrees in those with left renal vein compression without nutcracker phenomenon, and the mean angle of 11.9 degrees in those with nutcracker phenomenon.
(9) A neodymium YAG (Nd:YAG) laser was evaluated in a dog ulcer model used in the same manner as is recommended for bleeding patients (power 55 W, divergence angle 4 degrees, with CO2 gas-jet assistance).
(10) We set a new basic plane on an orthopantomogram in order to measure the gonial angle and obtained the following: 1) Usable error difference in ordinary clinical setting ranged from 0.5 degrees-1.0 degree.
(11) By measurement and analysis of the changes in carpal angles and joint spaces, carpal instability was discovered in 41 fractures, an incidence of 30.6%.
(12) The penetration coefficient, determined by the surface tension, contact angle and viscosity, is a measure of the ability of a liquid to penetrate into a capillary space, such as interproximal regions, gingival pockets and pores.
(13) Bohler's angle may be reconstituted with apparent reduction of the posterior facet when projected laterally; however, Broden's and axial views show persistent widening and split of the posterior facet.
(14) The advantages of the incision through the pars plana ciliaris are (1) easier approach to the vitreous cavity, (2) preservation of the crystalline lens and an intact iris, and (3) circumvention of the corneal and chamber angle complications sometimes associated with the transcorneal approach.
(15) These patients did not have narrow anterior chamber angles preoperatively, and several were aphakix with surgical iris colobomas.
(16) Seventy-eight patients presented optochiasmal arachnoiditis: 12 had trigeminal neuralgia; 1, arachnoiditis of the cerebellopontile angle; 6, arachnoiditis of the convex surface of the brain; and 3, the hypertensive hydrocephalic syndrome due to occlusion of the CSF routes.
(17) In this paper, we develop functions suggested by and regression fit to crystallographic data which allow three of these torsion angles, alpha (O3'-P-O5'-C5'), delta (C5'-C4'-C3'-O3') and epsilon (C4'-C3'-O3'-P), to be calculated as dependent variables of those remaining.
(18) An angle of 40 degrees or more was supposed to be a pathological kyphosis.
(19) The lower neck flexion is 35 degrees and extension of the plane of the face 15 degrees, each angle measured relative to horizontal.
(20) Two homosexual men, 35 and 42 years old, had bilateral acute angle-closure glaucoma in association with the acquired immune deficiency syndrome.
Chamfer
Definition:
(n.) The surface formed by cutting away the arris, or angle, formed by two faces of a piece of timber, stone, etc.
(v. t.) To cut a furrow in, as in a column; to groove; to channel; to flute.
(v. t.) To make a chamfer on.
Example Sentences:
(1) Somehow, everything we produced had a decidedly 1970s feel, a look formed by both the number of chamfered blocks in the set, and the inescapable desire to make everything symmetrical as you stack floor upon floor.
(2) Although the dentin bonding agents tend to accumulate on chamfers, thereby increasing their thickness to 200-300 microns, the method looks promising as a simple way to protect the pulp from the consequences of microleakage.
(3) A chamfer with a bevel, a shoulder with a bevel, or chamfer preparations are not suited to this technique.
(4) The crown margin designs taught most often were the flat shoulder, the 45-degree bevel shoulder, and the chamfer.
(5) This study evaluated chamfered and beveled preparations for Class IV restorations of lesions with microfilled and macrofilled composite resin.
(6) Serial radiographic analyses demonstrate progressive narrowing of all of the chamfered cylinder design and less in hemispherical design with screw fixation.
(7) This study tested three different types of crown margin preparations--a chamfer, a shoulder, and a shoulder plus a bevel to determine whether or not the margin preparation could affect microleakage.
(8) Facial and lingual chamfer margins were placed in enamel, mesial and distal in dentin and cementum, and castings were made in Rexillium III alloy and were then cemented with a standardized technique.
(9) This study indicated that the resin bonded cast fixed partial denture with the lingual chamfer margin and mesial rest was the design to be chosen.
(10) Group I consisted of 43 restorations placed without any tooth preparation; Group II consisted of 72 restorations placed using a chamfer preparation.
(11) The margin designs were rounded-shoulder, rounded-shoulder with a bevel, and a chamfer.
(12) On the acetabular side, both the cementless hemispherical with screw-type adjuvant fixation, or the chamfered cylinder designs, used primarily with the UCLA porous surface replacements, but also with stem-type devices, appear to achieve best short-term results, while the entire variety of screw rings are disappointing.
(13) With 76 different types of Lego bricks scattered across the table, from flat baseplates to chamfered wedge-shaped blocks and lots of tiny pieces with nipples and sockets sprouting in all directions, the challenge was to know where to begin.
(14) These included the use of thin metal copings (0.1 and 0.2 mm), a chamfer preparation, an alloy with relatively poor creep resistance, and a large thermal contraction mismatch between the alloy and porcelain layers.
(15) The accepted marginal design indicated by manufacturers for ceramic jacket crowns is the 90 degrees full shoulder with a rounded gingival-axial line angle or a deep chamfer.
(16) The weakest restorations were observed when a 0.8-mm chamfer finish line (66.8 kg) was used.
(17) Seventy extracted intact, non-carious maxillary central incisors, of approximately the same size, were collected and randomly divided into the following seven groups: 90 degrees butt joint (control)), 1 and 2 mm 45 degrees bevels, 1 and 2 mm 60 degrees bevels, and 1 and 2 mm chamfer margins.
(18) There was no significant difference in marginal fit between the shoulder and the chamfer configuration in every luting material examined.
(19) The coping and crown dimensions were based on a prepared maxillary central incisor with a facial shoulder and a lingual chamfer.
(20) The experiments were conducted in the following manner: Ten pieces of full cast crowns were constructed by a conventional procedure with 12% Au-Ag-Pd alloy and each test-piece was cemented alternately by zinc phosphate cement on a master die (stainless steel) with a chamfer margin.