(n.) Any large piece of timber or iron long in proportion to its thickness, and prepared for use.
(n.) One of the principal horizontal timbers of a building or ship.
(n.) The width of a vessel; as, one vessel is said to have more beam than another.
(n.) The bar of a balance, from the ends of which the scales are suspended.
(n.) The principal stem or horn of a stag or other deer, which bears the antlers, or branches.
(n.) The pole of a carriage.
(n.) A cylinder of wood, making part of a loom, on which weavers wind the warp before weaving; also, the cylinder on which the cloth is rolled, as it is woven; one being called the fore beam, the other the back beam.
(n.) The straight part or shank of an anchor.
(n.) The main part of a plow, to which the handles and colter are secured, and to the end of which are attached the oxen or horses that draw it.
(n.) A heavy iron lever having an oscillating motion on a central axis, one end of which is connected with the piston rod from which it receives motion, and the other with the crank of the wheel shaft; -- called also working beam or walking beam.
(n.) A ray or collection of parallel rays emitted from the sun or other luminous body; as, a beam of light, or of heat.
(n.) Fig.: A ray; a gleam; as, a beam of comfort.
(n.) One of the long feathers in the wing of a hawk; -- called also beam feather.
(v. t.) To send forth; to emit; -- followed ordinarily by forth; as, to beam forth light.
(v. i.) To emit beams of light.
Example Sentences:
(1) An argon laser beam was used to irradiate the round window in 17 guinea pigs.
(2) Streaming is shown to occur in water in the focused beams produced by a number of medical pulse-echo devices.
(3) 11 patients with a postoperative classification of stage D had additional external beam radiation to the pelvic and paraaortic lymph nodes with shielding of the implanted prostatic region.
(4) The data collection scheme for the scanner uses multiple rotations of a linearly shifted, asymmetric fan beam permitting user-defined variable resolution.
(5) The scatter measurement was made using a standard imaging geometry with both beam stops and an additional x-ray detector placed behind the standard imaging detector.
(6) In an effort to decrease the treatment time for this technique, the flattening filter has been removed from an AECL Therac-6 linear accelerator and the characteristics of the resulting beam have been measured.
(7) Comparative clinical studies on temporomandibular joints (TMJ) between the LEGP and fan beam collimators also confirm the superior image quality obtained with the fan beam collimator.
(8) The special advantage of the UV-beam is that it allow to inactivate selectively of the particular elements of nuclear apparatus of living ciliates is to observe consequences of operation on distant descendants of irradiated cell.
(9) Three-five days after endoscopic laser destruction long-distance open-field gamma-beam therapy was administered to 10 patients and polychemotherapy to 9 of these.
(10) Guidelines for external beam treatment have been set forth in the ASTRO Newsletter.
(11) In work to determine whether X-radiation could be used to induce tumors of the colon in outbred Holtzman rats, a technique was devised so that only the descending colon could be irradiated with a collimated X-ray beam and tumorigenic exposures in the kilo-Roentgen range were delivered.
(12) Nevertheless some technical variations are required, to maintain the typical homogeneity of photon beams.
(13) The RBEs of fast neutron, thermal neutron beams, and neutron capture therapy relative to 60Co gamma-ray were calculated as 2.78, 4.18, and 6.15 at 0.1 surviving fraction, respectively.
(14) Some patients received postoperative external beam irradiation (2000 cGy whole pelvis and an additional 3000 cGy to the parametria, with a midline stepwedge) when deep myometrial invasion was present.
(15) Between 1981 and 1985, 20 patients with malignancy-associated ureteral obstruction (MAUO) were given external beam irradiation with a palliative intent.
(16) Finally, the question of oncogenic effects raised with 193 nm laser beams does not seem to apply to the 308 nm wavelength.
(17) Hence the laser beam acts as a fixation target and measuring beam.
(18) Electron beam therapy is usually employed for the treatment of tumours located at or near the surface of the body, because the electron beam gives a high dose near the surface, but falls off rapidly with increasing depth beyond the level of the 80% depth dose.
(19) By embedding the biopsy in the acrylic resin LR White, unsupported sections of which are stable in the electron beam, light and electron microscopy and immunocytochemistry become feasible on sections from the same block.
(20) Real 60Co beams contain lower energy components; in addition, Awall is defined differently by different authors.
Crosshead
Definition:
(n.) A beam or bar across the head or end of a rod, etc., or a block attached to it and carrying a knuckle pin; as the solid crosspiece running between parallel slides, which receives motion from the piston of a steam engine and imparts it to the connecting rod, which is hinged to the crosshead.
Example Sentences:
(1) However, the crosshead displacement measurements diverged from the extensometer measurements as the compressive load increased.
(2) Each specimen was distracted until failure at a constant crosshead displacement rate of 2.5 mm s-1 (approximately 1.0% strain per second).
(3) A shear load was applied to the bonded cylinders at a crosshead speed of 0.02 in.min-1 in an Instron testing machine, and the shear bond strengths were calculated and expressed in MN.m-2.
(4) The bonds were stressed to failure in an Instron machine at a crosshead speed of 0.02 inch per minute.
(5) At 770 N, the crosshead measurement was nearly twice the extensometer displacement.
(6) The developed viscometer must be coupled with a sensitive mechanical testing machine capable of an adequate range of crosshead speeds that can be changed rapidly.
(7) Composite resin specimens of four different surface roughnesses at both ends of the specimens were loaded at one of three crosshead speeds.
(8) The downside of screws is that the screwhead can get blocked (especially if you use the crosshead type), making it difficult to remove them later.
(9) A shear load was applied to the bonded cylinders in an Instron machine at a crosshead speed of 0.02 inch.min-1.
(10) The specimens were stored in physiological saline at 37 degrees C for 24 hours prior to applying a shear load at a crosshead speed of 0.5 mm.
(11) Crosshead speed and friction at the anvil have no significant effect on results, but compressive strength is a function of the diameter-length ratio of the cylinder and increases with this ratio.
(12) Shear bond tests were done in an Instron machine at a crosshead speed of 0.02 inches per minute.
(13) The testing machine crosshead displacement was used as one measure of displacement of the joint.
(14) The test specimens were disassembled 15 minutes after cure, stored in physiological saline at 37 degrees C for 24 hours, and the SBS determined in an Instron machine at a crosshead speed of 0.5 mm.min.-1 The SBS was expressed in MPa.
(15) The set-up was subjected to a tensile load at a crosshead speed of 1 mm per min.
(16) Several cements showed a marked reduction of the mechanical properties when tested at a low crosshead speed or at 37 degrees C.