(v. i.) To solder with hard solder, esp. with an alloy of copper and zinc; as, to braze the seams of a copper pipe.
(v. i.) To harden.
(v. t.) To cover or ornament with brass.
Example Sentences:
(1) The bond strength of the specimens brazed with the non-precious alloy was largely unaffected.
(2) A total of 69 male subjects occupationally exposed to cadmium fumes in a factory producing silver-cadmium-copper alloys for brazing, were subjected to lung function tests, including ventilation (FVC and FEV1), residual volume (RV) and alveolar-capillary diffusion capacity (TLCO and KCO).
(3) Tensile strength, 0.2% proof stress, and percentage elongation of the welded bars were measured and compared with the corresponding values for the titanium bars as delivered and with those of brazed type-3 gold alloy bars of similar dimensions.
(4) Brazed specimens of a high-gold alloy were used as a reference.
(5) Photograph: Christian Sinibaldi for the Guardian Abdul El Saidi, 56, is Brompton’s brazing manager.
(6) A braze alloy is used to join the sections of the sample together and the resulting sample is stable during subsequent grinding, dimpling, and milling operations.
(7) A method for preparing cross-section transmission electron microscopy specimens from alumina and partially stabilized zirconia braze joints is described.
(8) Facebook Twitter Pinterest Brazing in the Brompton factory.
(9) Get acquainted with archaic-sounding kitchen verbs: brewing, fermenting, brazing, curing.
(10) The action of local corrosion cells around the brazed joint is considered, and it is concluded that the two materials seem well suited for implant supraconstructions, provided that brazing the silver-palladium can be avoided.
(11) When I joined the company I used to get emails from all over the world from people saying, ‘I want to come and see the way you braze,’” the 54-year-old says.
(12) Facebook Twitter Pinterest A workman brazes components of a folding bike in the Brompton Bicycle factory.
(13) However, the multi-component devices, which were joined with silver- and copper-based brazing alloys were more cytotoxic than the single-component devices.
(14) The amounts of metal released from the brazed arch bar were 140-600 times higher than those released from the solid arch bar.
(15) Addition of low melting temperature elements gallium and indium reduced flow temperature in some cases but produced brittleness in the brazing alloy.
(16) The braze training manager at Brompton Bicycle is one of a dying breed of craftsmen in Britain whoturn the copper scars knitting together the steel frame into things of beauty.
(17) The nature of the fracture in the brazed joint is described, and corrosion identified as the mechanism of degradation of the joint.
(18) The technique relies on masking a mechanically dimpled 3-mm disc in order to avoid preferential thinning of the metallic braze filler alloy during ion milling.
(19) The carbon composite and the silver-palladium per se did not corrode, whereas a silver-palladium specimen brazed with the recommended brazing alloy corroded unmistakably, yielding copper-containing corrosion products.
(20) It is recommended that appropriate grades of silver brazing alloy be used in the future, and that the mechanical integrity of medical devices joined with silver braze be regularly checked to anticipate failure in use.
Solder
Definition:
(n.) A metal or metallic alloy used when melted for uniting adjacent metallic edges or surfaces; a metallic cement.
(n.) anything which unites or cements.
(n.) To unite (metallic surfaces or edges) by the intervention of a more fusible metal or metallic alloy applied when melted; to join by means of metallic cement.
(n.) To mend; to patch up.
Example Sentences:
(1) This study compared soldering by a conventional torch procedure with an infrared soldering technique.
(2) However, the effect of the soldering atmosphere on the tensile strength was small.
(3) No effects on behavioral function were observed among the solderers.
(4) This contaminant was not present after a control exposure while soldering on iron.
(5) The following therapeutic proposal was adapted: On the maxilla, a three-step procedure: first step: building of metal copings on 13, 16 and 26 and metal-ceramic crowns on 11 and 21, second step: building of telescop crowns on 16 and 26 and clasps on 13, 11 and 21, third step: casting of the removable partial denture framework and soldering to the telescop crowns and clasps.
(6) Wettability of the liquid solder on UNI METAL was better than on Victory II.
(7) The stainless steel shank is a cathodic component of a three-way galvanic cell, whereas the silver soldered joint is an anodic component.
(8) If you only have an 20cm tin you can use that instead, but don't use all the batter – about 80% will suffice – otherwise you'll end up with a volcanic overspill, cake soldered to the floor of the oven and a frayed temper.
(9) Using the rat as a model, a partial transection of the ventral urethra was repaired in one of three ways in 39 animals: conventional microsuture repair, laser assisted microsuture repair and laser assisted microsuture repair with a protein solder.
(10) Three alloys had corrosion resistance superior to the other solders.
(11) We form a kind of chain, soldered together by grief and suffering, but also by a way of living and thinking which the killers wanted to destroy.
(12) Workers in the following job categories experienced the highest annual mean PbB levels: paste machine operators (battery plants), solder-grinders (assembly plants), and crane operators (foundries).
(13) Soldering flux used in the electronics industry can cause both irritant and allergic contact dermatitis.
(14) Soldering fractures constitute an important cause of the removal of appliances during the first 8 years following application.
(15) In this study about melting and torchs employed in solder in fixed prosthodontics, it's analysed the accurate melting, adequate quantity, as well as protection of adjacent tissues with an accurate anti-melting.
(16) Two cobalt-chromium alloys (Blue Elgiloy, Crozat) and an austenitic stainless steel alloy (Remanium) were soldered by an electrochemically generated hydrogen-oxygen flame forming an overlapped joint design.
(17) The aim of this study was to determine the release of Au, Cu, Sn, Zn, and Ag from five commercially available Cd-free gold solders.
(18) The question of whether to cast in one piece or in multiple sections that are soldered is discussed.
(19) In the case of soldering electrically wrought wire clasps to metal structures such as rests and connectors, there is no fear of of overheating a wide area of wires.
(20) In the sample studied the proportion of foods contained in non-soldered as opposed to soldered cans has risen consistently during the survey and now accounts for 83% of all samples (excluding sardines).