(n.) The surface formed by cutting away the arris, or angle, formed by two faces of a piece of timber, stone, etc.
(v. t.) To cut a furrow in, as in a column; to groove; to channel; to flute.
(v. t.) To make a chamfer on.
Example Sentences:
(1) Somehow, everything we produced had a decidedly 1970s feel, a look formed by both the number of chamfered blocks in the set, and the inescapable desire to make everything symmetrical as you stack floor upon floor.
(2) Although the dentin bonding agents tend to accumulate on chamfers, thereby increasing their thickness to 200-300 microns, the method looks promising as a simple way to protect the pulp from the consequences of microleakage.
(3) A chamfer with a bevel, a shoulder with a bevel, or chamfer preparations are not suited to this technique.
(4) The crown margin designs taught most often were the flat shoulder, the 45-degree bevel shoulder, and the chamfer.
(5) This study evaluated chamfered and beveled preparations for Class IV restorations of lesions with microfilled and macrofilled composite resin.
(6) Serial radiographic analyses demonstrate progressive narrowing of all of the chamfered cylinder design and less in hemispherical design with screw fixation.
(7) This study tested three different types of crown margin preparations--a chamfer, a shoulder, and a shoulder plus a bevel to determine whether or not the margin preparation could affect microleakage.
(8) Facial and lingual chamfer margins were placed in enamel, mesial and distal in dentin and cementum, and castings were made in Rexillium III alloy and were then cemented with a standardized technique.
(9) This study indicated that the resin bonded cast fixed partial denture with the lingual chamfer margin and mesial rest was the design to be chosen.
(10) Group I consisted of 43 restorations placed without any tooth preparation; Group II consisted of 72 restorations placed using a chamfer preparation.
(11) The margin designs were rounded-shoulder, rounded-shoulder with a bevel, and a chamfer.
(12) On the acetabular side, both the cementless hemispherical with screw-type adjuvant fixation, or the chamfered cylinder designs, used primarily with the UCLA porous surface replacements, but also with stem-type devices, appear to achieve best short-term results, while the entire variety of screw rings are disappointing.
(13) With 76 different types of Lego bricks scattered across the table, from flat baseplates to chamfered wedge-shaped blocks and lots of tiny pieces with nipples and sockets sprouting in all directions, the challenge was to know where to begin.
(14) These included the use of thin metal copings (0.1 and 0.2 mm), a chamfer preparation, an alloy with relatively poor creep resistance, and a large thermal contraction mismatch between the alloy and porcelain layers.
(15) The accepted marginal design indicated by manufacturers for ceramic jacket crowns is the 90 degrees full shoulder with a rounded gingival-axial line angle or a deep chamfer.
(16) The weakest restorations were observed when a 0.8-mm chamfer finish line (66.8 kg) was used.
(17) Seventy extracted intact, non-carious maxillary central incisors, of approximately the same size, were collected and randomly divided into the following seven groups: 90 degrees butt joint (control)), 1 and 2 mm 45 degrees bevels, 1 and 2 mm 60 degrees bevels, and 1 and 2 mm chamfer margins.
(18) There was no significant difference in marginal fit between the shoulder and the chamfer configuration in every luting material examined.
(19) The coping and crown dimensions were based on a prepared maxillary central incisor with a facial shoulder and a lingual chamfer.
(20) The experiments were conducted in the following manner: Ten pieces of full cast crowns were constructed by a conventional procedure with 12% Au-Ag-Pd alloy and each test-piece was cemented alternately by zinc phosphate cement on a master die (stainless steel) with a chamfer margin.
Flute
Definition:
(v. i.) A musical wind instrument, consisting of a hollow cylinder or pipe, with holes along its length, stopped by the fingers or by keys which are opened by the fingers. The modern flute is closed at the upper end, and blown with the mouth at a lateral hole.
(v. i.) A channel of curved section; -- usually applied to one of a vertical series of such channels used to decorate columns and pilasters in classical architecture. See Illust. under Base, n.
(n.) A similar channel or groove made in wood or other material, esp. in plaited cloth, as in a lady's ruffle.
(n.) A long French breakfast roll.
(n.) A stop in an organ, having a flutelike sound.
(n.) A kind of flyboat; a storeship.
(v. i.) To play on, or as on, a flute; to make a flutelike sound.
(v. t.) To play, whistle, or sing with a clear, soft note, like that of a flute.
(v. t.) To form flutes or channels in, as in a column, a ruffle, etc.
Example Sentences:
(1) The 12-fluted bur caused no clinically identifiable marks on the enamel surface.
(2) Sounds (flute and violin) and vowels (German "u" and "i") evoke a complex motion pattern on the basilar membrane.
(3) Acceptable finishing procedures for the composite materials tested include silicon carbide disks for accessible areas or 12 fluted finishing burs for more inaccessible areas.
(4) The musician group was comprised of 31 brass instrument players, and 31 reed instrument or flute players.
(5) I also love music – I taught myself Chinese traditional instruments, such as the bamboo flute, and brought them to Britain.
(6) The results showed that the high speed finishing technique by twelve and thirty fluted carbide burs and final polishing with Command Ultrafine Luster Paste produces the smoothest and flatest surface of HERCULITE XR.
(7) More than 1,000 republican dissidents, their supporters and seven flute bands marched from the nationalist Ardoyne district, through the north of the city to central Belfast.
(8) He admired a portrait of a girl playing a flute and was amused by the pictures of North Korea’s late leaders Kim Jong-il and Kim Il-sung, which hung high on the wall in the middle of the room, as is common in government buildings.
(9) Line the tin with the pastry, pressing into the fluted edges of the tin.
(10) The simplified technique of insertion, the strength of the device, and the results of this study indicate that the fluted subtrochanteric rod has several advantages over other available devices.
(11) He dropped karate lessons and started learning the flute.
(12) Debris was also recorded on the land and flute spiral surfaces with morphological changes on the dentinal walls.
(13) A series of identically matched pairs of fresh-frozen canine femora (approximating human radii in size and dimension) were used to mechanically compare pull-out strength between 4 mm predrilled, self-tapping, half-pins and 4 mm self-drilling, self-tapping half-pins with drill bit-like cutting flutes.
(14) The word still makes me blench – Orangemen marching, Gazza playing an imaginary flute to Rangers fans, sectarian hatreds.
(15) Listening to Temples' Prisms three and half decades on, to its shimmering Beach-Boys-in-66 sonics and baroque arrangement (warning: features prominent use of flutes), you might feel similarly baffled.
(16) The stepped fluted rod is designed as a single unit and has exceptional bending strength and rigidity as well as excellent torsional load-carrying capacity.
(17) I have developed a flute-pick for peeling preretinal membranes in the presence of surface or intravitreal hemorrhages.
(18) One hundred ninety-three of 196 acute nonpathologic femoral shaft fractures were treated consecutively with intramedullary nailing using the fluted rod.
(19) Penetrability of the bovine teat duct to Escherichia coli endotoxin solution was measured before and after reaming the duct with a polypropylene tube, a steel twist drill bit, or a fluted drill point.
(20) The influences of surface structures, such as threads, cuts, holes, perforations, and flutes, are demonstrated.